Skip to main content

Wavelength division multiplexing (WDM)

Wavelength division multiplexing (WDM):


Wavelength division multiplexing (WDM)
Wavelength division multiplexing (WDM)

Definition: "Wavelength-division multiplexing (WDM) could be a technique of mixing multiple signals on optical device beams at varied infrared (IR) wavelengths for transmission on fiber optic media. every optical device is modulated by AN freelance set of signals. Wavelength-sensitive filters, the IR analog of visible-light color filters, square measure used at the receiving finish".

WDM is analogous to frequency-division multiplexing (FDM). however rather than going down at radio frequencies (RF), WDM is completed within the IR portion of the spectrumevery IR channel carries many RF signals combined by suggests that of FDM or time-division multiplexing (TDM). every multiplexed IR channel is separated, or demultiplexed, into the initial signals at the destination. victimization FDM or TDM in every IR channel together with WDM or many IR channels, information completely different|in several|in numerous} formats and at different speeds will be transmitted at the same time on one fiber.

Wavelength division multiplexing (WDM)
Wavelength division multiplexing (WDM)

 

In early WDM systems, there have been 2 IR channels per fiber. At the destination, the IR channels were demultiplexed by a dichroic (two-wavelength) filter with a cutoff wavelength some midway between the wavelengths of the 2 channels. It before long became clear that quite 2 multiplexed IR channels might be demultiplexed victimization cascaded dichroic filters, giving rise to coarse wavelength-division multiplexing (CWDM) and dense wavelength-division multiplexing (DWDM). In CWDM, there square measure sometimes eight completely different IR channels, however there will be up to eighteen. In DWDM, there will be dozens. as a result of every IR channel carries its own set of multiplexed RF signals, it's on paper potential to transmit combined information on one fiber at a complete effective speed of many hundred gigabits per second (Gbps).

The use of WDM will multiply the effective information measure of a fiber optic communications system by an outsized issuehowever its value should be weighed against the choice of victimization multiple fibers bundled into a cable. A fiber optic repeater device known as the Er electronic equipment will build WDM a cheap long-run answer



working of Wavelength division multiplexing (WDM)

Wavelength division multiplexing (WDM)
Wavelength division multiplexing (WDM)

Q. what one can do with wavelength division multiplexing ?

Answer:


            Using wavelength division multiplexing (WDM) technology several wavelengths, or light colors, can simultaneously multiplex signals of 2.5 to 40 Gbps each over a strand of fiber. Without having to lay new fiber, the effective capacity of existing fiber plant can routinely be increased by a factor of 16 or 32. Systems with 128 and 160 wavelengths are in operation today, with higher density on the horizon. The specific limits of this technology are not yet known.

WDM increases the carrying capacity of the physical medium (fiber) using a completely different method from TDM. WDM assigns incoming optical signals to specific frequencies of light (wavelengths, or lambdas) within a certain frequency band. This multiplexing closely resembles the way radio stations broadcast on different wavelengths without interfering with each other (see Figure 1-7). Because each channel is transmitted at a different frequency, we can select from them using a tuner. Another way to think about WDM is that each channel is a different color of light; several channels then make up a “rainbow.”

Popular posts from this blog

Multiplexing and Multiple Access

Multiplexing And Multiple Access : Digital Communications Difference between Multiplexing and Multiple Access: Sr.No. Multiplexing Multiple Access 1 “In telecommunications and  computer networks, multiplexing is a process where multiple analog  message signals or digital data  streams are combined into one   signal over a shared medium.” “In telecommunications and computer networks, a channel access method or multiple access  method allows several terminals connected to the same multipoint physical medium to transmit over it and to share its capacity.” 2 The multiplexed signal is transmitted  over a communication channel,  which may be a physical transmission medium. A channel-access scheme is  based on a multiplex method  that allows several data streams  or signals to share the  same communication channel or  physical media.

Comparison between armature controlled and field controlled DC servo motor

Comparison between armature controlled and field controlled DC servo motor : Field controlled DC servomotor Armature controlled DC servomotor 1.                         Field is excited by control voltage Armature is excited by control voltage 2.                        Armature            current kept constant Field      current kept constant 3.                        Required             low        power amplifiers are simple to design Required             high       power amplifiers 4.                        Efficiency is poor Efficiency is better 5.                        It has large time constant It             has         small      time constant 6.                        Cost is low Cost is high 7.                        It is open loop system It is close loop system Comparison between ar

Difference in between Time division multiplexing (TDM) and Frequency division multiplexing (FDM)

Difference in between TDM and FDM: This page on FDM versus TDM describes  difference between FDM and TDM multiplexing . FDM is the short form of frequency division multiplexing and TDM is the short form of time division multiplexing. In FDM each signal is modulated onto different unique RF carrier frequency and all carrier frequencies are separated significantly so that bandwidth of the signals do not overlap in frequency domain. Figure: Difference in between TDM and FDM